Spa Forums

The information contained in this forum is from SpaForums.Com and IS NOT AUTHORITATIVE advice or official commentary from Spa Shopper, SpaPartsNet.com or SpaBabes.com. Use this information at your own risk!

This topic has attachments which you can't view here. To see this topic in its entirety, Click Here

Dynasty Spas FLO error

Forums  >  Troubleshooting Your Hot Tub

Dynasty Spas FLO error
I inherited a 2008 Dynasty spa when I purchased my new home. After troubleshooting 7 leaks, I finally got it up and running. I tried it out last night for the first time and it worked great for about an hour, but then both pumps turned off and I got a FLO error. We were not using the heater. I cleaned the filter cartridges, but the display now switches between 3 dashed lines and the FLO error. The pumps will not turn on at all. I checked all the gate valves to make sure they are not closed. I am not sure what to check next. I am completely new to spa operations, so please don't assume I know anything. Any help would be appreciated.
Posted: 2010-08-07 03:37:39   By: kerrylf