The information contained in this forum is from SpaForums.Com and IS NOT AUTHORITATIVE advice or official commentary from Spa Shopper, SpaPartsNet.com or SpaBabes.com. Use this information at your own risk!
This topic has attachments which you can't view here. To see this topic in its entirety, Click Here
Jacuzzi Z145/345 Heating ProblemForums
> Troubleshooting Your Hot Tub
Jacuzzi Z145/345 Heating Problem
Had this Jacuzzi for about 2 years when for no apparent reason heater LED went into a Flashing Mode (Anolog Control Panel) Tub would not start while in flashing mode but when I reset GFI Hot tub would start and run properly. I noticed that flashind LED did not contantly maintain flashing mode. While flashing there was no circulation of water but tub remained to heat fine (about 112*). Now for about the last month the temperature is only maintaining about 85* and I have not noticed the Flashing LED Stage. Any help on what my problem maybe would be appreciated thanks Tom
Posted: 2008-03-04 05:30:31 By: ztjm35